CEF32

LA36

A DEC LA36 (DECWriter II) printing terminal that can  also emulate the DEC LA30 (DECWriter), an the various  models of the Teletype Model 33 (including paper tape  reader/punch).  Selecting the mode (emulation) will alter  the other operational parameters of the printer, so the  model should be set before any other options are set.   Ceratin operations are not allowed in some modes. 
Startup commands:
Command
Description
ALLOW_HEREIS
Allow use of "here is".
ALT_CHARACTER_SET ENABLE
Enables use of alternate character set.
ALT_CHARACTER_SET LOCK
Lock alternate character set.
ALT_CHARACTER_SET USE
Switch to alternate character set.
ALTERNATE_FONT n
Associate font n with the alternate character set.
AUTOLF RECEIVE
Do auto LF when CR received.
AUTOLF TRANSMIT
Do auto LF when CR transmitted.
BAUD AUTO
Set baud rate to auto.
BAUD n
Set baud rate to n.
BLEED n
Set ink bleed to n.
BLUEBAR
Set paper to blue bar.
CAPTION x
Set caption to x.
COLUMN n
Set current column to n.
COLUMNS n
Sets maximum column.
COMPRESSED
Use compressed font.
DATA_BITS n
Set data bits to n.
EMULATION x
Set terminal emulation mode to x.  Valid values are "ASR33" or "TTY" for Teletype Model 33, "KSR33" for Teletype Model 33-KSR, "RO33" for Teletype Model 33-RO, "LA30" for DEC LA30 (DECWriter), and "LA36" for DEC LA36 (DECWriter II).  The default is LA36.
FLOW NONE
Turns off flow control.
FLOW CTS
Use CTS/DSR for flow control.
FLOW XOFF
Use XON/XOFF for flow control.
FORM_CONTROL
Turn on form control.
FONT x
Set font to x.
GREENBAR
Use greenbar on paper.
HEIGHT x
Set form height to x lines.
HEREIS x
Set "here is" message text to x.  The text must be enclosed in single (') or double (") quotes.
KEYBOARD x
Set keyboard to component named x.
LOCAL_ECHO
Turns on local echo.  Local echo is off by default.
LOG n{/APPEND}
Set log file to n.  The optional /APPEND means to append to the end of the file if it already exists.
MAGNIFICATION n
Sets the magnification of the page to n.
MAP s1 s2
Map key s1 to s2.
MARGIN n
Set margin to n.
MARGIN_BELL n
Sound tone when margin n is reached.  A value of 0 turns off the margin bell.
MAX_PAGE n
Sets the maximum page of paper.  By default, the paper is assumed to be infinite.
MIXEDCASE IN
Allows mixed case on received characters.  Otherwise, the characters are converted to uppercase before they are pritned.
MIXEDCASE OUT
Allows mixed case on sent characters.  Otherwise characters are converted to uppercase before being transmitted.
NOBAR
Sets paper to plain (unbarred).
NOKEYBOARD
Removes keyboard.
NOMARGIN_BELL
Turns off margin bell.
NOPARALLEL
Turns off threading for thie component.
NOWRAP
Turns off automatic wrapping of lines.
OFFLINE
Sets the terminal to offline mode.
ONLINE
Sets the terminal to online mode.
PAGE n
Sets current page of paper to n.
PAGE_HEIGHT n
Sets paper page height to n.
PAGE_WIDTH n
Sets paper page width to n.
PAPER x
Use file x as the paper for this printer.
PAPER_TAPE x
Use file x as the paper tape for the reader.
PARITY
Turns on parity for I/O.
ROW n
Set current line of the page to n.
LINE n
Same as ROW.
SELECTIVE_ADDRESSING ENABLE
Enable selective addressing mode.
SELECTIVE_ADDRESSING SELECTED
Set printer as selected.
SELECTIVE_ADDRESSING MASTER
Set printer as master.
SELECTIVE_ADDRESSING UNIT n
Set unit code to n.
SELECTIVE_ADDRESSING GROUP n
Set group code to n.
STOP n
Set stop bits to 0 or 1.
TABS n{,n...};
Set horizontal tab stops.
UPPERCASE IN
Opposite of MIXEDCASE IN.
UPPERCASE OUT
Opposite of MIXEDCASE OUT
VERTICAL_TABS n{,n...};
Set vertical tab stops.
WRAP
Turns on automatic wrapping.
The following signals are supported by this component:
Signal Name
Description
DSR
Data set ready.